Bathroom Plumbing in Elkhorn, NE

From a dripping cartridge to a full remodel rough-in, bathroom plumbing is most of what a residential plumber actually does. Water Heater Repair Elkhorn handles all of it — repair, replacement and new installation.

Call (402) 897-1841
A plumber fitting a shower mixing valve into an open bathroom wall cavity during a remodel

Bathroom plumbing services

Faucets and cartridges

Dripping, stiff or leaking at the base. Cartridge and stem replacement on Moen, Delta, Kohler and the rest, or a clean swap for a new fixture.

Shower and tub valves

Pressure-balancing and thermostatic valve replacement, diverter faults, and the classic scalding-when-someone-flushes problem.

Toilets

Running, weak-flushing, rocking or leaking at the base. Wax ring and flange repairs, fill and flush valve rebuilds, full replacements.

Sinks and drains

Slow drains, P-trap leaks, pop-up assemblies and vanity installations.

Remodel rough-in

Moving supply and waste lines for a new layout, setting the tub or shower base, and coming back for trim-out when the tile is done.

Leaks inside walls and ceilings

A brown patch on a ceiling below a bathroom is a supply or waste leak until proven otherwise. We locate it before we open the drywall.

Hard water and bathroom fixtures

Bathroom fixtures are where local water quality announces itself first. Mineral deposits seize cartridges, choke aerators and shower heads, and chew through trim finishes years ahead of schedule. If you find yourself replacing the same cartridge every eighteen months, the fixture is not what is failing.

Planning a bathroom remodel?

Get the plumber in before the tile goes down, not after. Venting, drain slope and valve depth are all decided at rough-in, and they are expensive to revisit. We work alongside remodelers across Elkhorn and west Omaha and are happy to walk a plan with you before anything is ordered.

Frequently asked questions

Can you move a toilet or sink to a new spot?

Usually yes, but it depends on where the existing drain and vent run. On a slab that is a bigger job than on a joist bay above a basement. We will look and tell you what is realistic.

My shower has no pressure. Is that a plumbing problem?

Often it is just a scaled shower head or a clogged cartridge screen. Sometimes it is a partially closed valve or a failing pressure-balancing spool. All of those are quick to diagnose.

Do you install customer-supplied fixtures?

Yes. Bring your own faucet or toilet and we will fit it. We will flag it if we think a particular unit is going to give you trouble.

Also Worth A Look